    |
Ritter M9 UltraClave sterilizer has easy front access for filling and draining and has controls that are easy to understand . FDA Registered Sterilizer. |
- Non-Automatic door
- Programmable controls allow for creation of different cycle parameters for special sterilization needs.
- Programmable buttons allow you to change the following:
- Time (3 to 90 minutes)
- Temperature (230 to 275° F)
- Dry Time (0 to 60 minutes)
- Vent (slow or fast) and two program buttons
- Four pre-programmed sterilization cycle controls: Unwrapped (132° C or 270° F for 3 minutes), Pouched (132° C or 270° F for 5 minutes), Packs (121° C or 250° F for 30 minutes), Handpiece (Dental Handpiece use only)
- LCD Display: Indicates cycle selected, temperature and exposure time for selected cycle. During the cycle, the display shows messages describing status of cycle. When the cycle enters sterilization mode, remaining time is displayed as well as temperature and pressure.
- Cycle Start: (Initiates selected cycle)
- Manual Stop:(Terminates selected cycle or function)
|
- Overall length with plug: 20.4in (51.8cm)
- Overall width: 15.3in (38.9cm))
- Overall height with printer: 15.8in (40.1cm)
- Minimum Countertop area: 15.3in x 17.9in (38.9cm x 45.4cm)
- Meets the requirements of ASME Boiler and Pressure Vessel Code A separate (dedicated) circuit is recommended for this sterilizer.
- Trays:
- Two large(W x L x D): 7.3in x 12in x 8in (8.6cm x 30.5cm x 2.2cm)
- Two small(W x L x D): 5.6in x 12in x .8in (14.3cm x 30.5cm x 2.2cm)
- Electrical Requirements:
- 115 VAC, 50/60 Hz, 15 Amps Single Phase
- 115 VAC has 1425 watt tubular immersion heater
- UL61010A-1, UL61010A-2-041
- CAN/CSA C22.2 No. 1010
- CAN/CSA C22.2 No. 1010.2-041-96
- Chamber:
- Diameter: 9in (22.9cm)
- Depth: 15.1in (38.1cm)
- Volume: 2.5 gal (9.0 liters)
|
|
|
|
