     |
| The GE Healthcare T-2100 Treadmill is at the forefront of patient safety, dependability and overall performance – the culmination of continual technological development and attention to detail specially designed to meet the high quality standards you expect from GE.
With fewer moving parts than other treadmills, the GE T-2100 treadmill delivers extremely smooth, quiet operation that facilitates accurate blood pressure measurements even at high workloads. Thanks to digital microprocessor control, its settings never need to be calibrated. And a 450-pound weight capacity and speed range of 0-13.5 miles per hour set the GE T-2100 treadmill apart from other devices. |
| Extra-long, 60-inch surface provides an extra margin of safety for patients.
Zero start feature slowly builds up speed for safe and smooth operation.
Standard stop button enables a gradual stop.
Emergency stop button provides immediate stop.
Full front and side handrails are standard.
450 lb weight capacity
0 to 13.5 mph speed range.
0 to 25 percent grade range.
Enhanced tolerance to electrical changes for greater patient safety.
Self-calibrating for speed and grade.
Digital control insures precise speed and grade control.
US power cord with wall connector. |
Physical specifications
Weight: 400 lbs (181.4 kg)
walking area: 18in x 60in (45.7cm x 152.4 cm)
Floor space required: 29in x 77in (73.7 cm x 195.6 cm)
Handrail height above walking surface:
- Front: 40in (101.6 cm)
- Side: Maximum 35in (88.9 cm) descending at a 5° angle to 32in (81.3 cm)
Environmental Specifications
Power requirements:
- 208 to 240 VAC
- 50/60 Hz
- Single-phase
- 20 amperes
- NEMA 6-20 R wall socket (dedicated circuit recommended)
Operating conditions
Ambient temperature: 50° F to 95° F (10° C to 40° C)
Relative Humidity: 15% to 90%
Storage conditions
Temperature range: 0° F to 120° F (-18°C to 49° C)
Relative Humidity: 15% to 90%
Performance specifications
Maximum rated load: 450 lbs (204 kg)
Belt speed range: 0 to 13.5 mph at 220 VAC/60 Hz continuously variable; 0 mph start-up
Driver motor: 3.0 hp
Elevation motor: 1/10th hp
Elevation range: 0 to 25% grade, continuously variable
Maximum leakage current: 100µA, chassis to groung |
|
|
|
